Pick up to 4tractors and we'll lay every spec sheet out side by side. Same data we publish on the individual model pages, stacked in columns so you can compare numbers at a glance.
—
RKTractorsRK25H
—
LSMT125
Comparison loaded for 2 tractors.
Spec
LS TractorMT125
PTO Power
17.2 hp
Alternator
40 A, 12 V
Air Cleaner
Dry
Engine Type
3-cylinder, Indirect-injection, Water-cooled
Fuel System
Indirect Injection
Displacement
77.3 in³
No. of Cylinders
3
Rated Engine Speed
3000 rpm
Cooling System Type
Water-cooled
Engine Manufacturer
Yanmar
Engine Power (Gross)
24.7 hp
Engine Emissions Constraints
Tier 4
Tractor Weight (Base)
1,444 lbs
Tractor Weight with Loader
1,444 lbs.
Weight with Cab and Loader
Not Published
Weight with ROPS and Loader
1444 lb
Pump Type
Gear pump type, Transmission drive
Steering Flow
2.1 gpm
Implement Flow
4.6 gpm
Pump Flow (Total)
6.7 gpm
Pump Flow (Steering)
2.1 gpm
Total Hydraulic Flow
6.7 gpm
Hydraulic System Type
Open center system, Position control
Pump Flow (Implement)
4.6 gpm
System Operating Pressure
12.7~13.2 MPa (1849~1920 psi)
Rear Remote Hydraulic Flow
NOT FOUND — No source explicitly lists a dedicated 'Rear Remote Hydraulic Flow' spec. The closest published figure is the implement pump flow of 4.6 gpm, but no source labels this specifically as 'Rear Remote' flow.
Overall Hydraulic Pump Flow
6.7 gpm
No. of Optional Remote Valves
1 Set
No. of Standard Remote Valves
0 (optional)
PTO Rear
540 rpm
PTO Type
Independent
Lift Control Type
Position Control
Hitch Lift Capacity
970 lbs. (At 24 in: 728)
Mid PTO (Type / RPM)
Standard (2500 rpm)
Mid-PTO Availability
Standard (2,500 rpm)
Rear PTO (Type / RPM)
Standard (540 rpm)
Category, 3-Point Hitch
Category 1
Three-Point Hitch Category
CAT I
Lift Capacity at 24 in Behind
728 lbs
Hitch Lift Capacity (at 24”)
728 lb
R3 Turf - Rear
26x12.0-12 4PR HSR82 (Turf)
R3 Turf - Front
18x8.50-10 4PR HS482 (Turf)
Tire Size & Options
Industrial Front/Rear 18×18.5 - 10/26 x 12.0 - 12; Versa Turf Front/Rear: 18×18.5 - 10/26 x 12.0 - 12
R4 Industrial - Rear
26x12.0-12 4PR HS610 (Industrial)
R4 Industrial - Front
18x8.50-10 4PR HS610 (Industrial)
R1 Agricultural - Rear
26 x 12.0 - 12
R1 Agricultural - Front
18×18.5 - 10
Coolant Capacity
0.9 gal (0.9U.S.gals)
Crankcase Capacity
0.8 gal (0.8U.S.gals)
Fuel Tank Capacity
6.6 gal.
Front Axle Fluid Capacity
0.5 gal (0.5U.S.gals)
Transmission/Hydraulic Capacity
3 gal (3.0 U.S. gals); 3.4 gal (3.4 U.S. gals) with front loader; 4.7 gal (4.7 U.S. gals) with front loader and backhoe
